• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Droid Reset

How to Factory Hard Reset an Android Smartphone

  • Home
  • Samsung
  • Asus
  • Sony
  • LG
  • Lenovo
  • OnePlus
Home › ZTE › ZTE Warp Sync Hard Reset

ZTE Warp Sync Factory Reset / Hard Reset

FacebookTwitterReddit

Factory Hard Reset is the process used to wipe all the data and settings on the phone and revert it back to factory defaults. It comes in handy during the situations when your device is working too slowly, facing software related issues, bypass the forgotten Patten/PIN or Pass Code, etc. Here we have listed step by step instructions on how to Soft Reset and Factory Reset ZTE Warp Sync.

Soft Reset is the process where there is no loss of data. The simple term for Soft Reset is Reboot. While on the other hand, Hard Reset deals with the loss of data as it wipes and cleans all the personal data and makes the device 100% clean. It is recommended to backup data before proceeding to Hard Reset ZTE Warp Sync.

ZTE Warp Sync Factory Reset

Table of Contents

  • 1 How to Hard Reset / Factory Reset ZTE Warp Sync
    • 1.1 ZTE Warp Sync Factory Reset from Settings Menu
    • 1.2 Hard Reset ZTE Warp Sync from Recovery Mode
  • 2 How to Soft Reset ZTE Warp Sync

Hard Reset is performed at the time of selling the device to others or during software issues and slowness. Soft Reset is performed to clear the RAM, and to clear the temporary cache, this frees the device from the sluggishness and offers the device a quick performance boost.

So, without any further ado, let’s proceed to the instructions on how to Soft Reset and Factory Hard Reset ZTE Warp Sync.

Also: ZTE Blade L6 Factory Hard Reset

How to Hard Reset / Factory Reset ZTE Warp Sync

Below are the methods using which you can factory reset ZTE Warp Sync.

ZTE Warp Sync Factory Reset from Settings Menu

  1. Power on your phone and unlock it.
  2. Open the Settings app.
  3. Tap on Backup & Reset and then Factory data reset.
  4. ZTE Warp Sync Factory Reset
  5. Now tap on RESET PHONE. If asked to enter the Passcode or PIN, enter the same and tap on ERASE EVERYTHING.
  6. ZTE Warp Sync Factory Reset
  7. Now, all the data will be wiped, and the device should reboot.

Hard Reset ZTE Warp Sync from Recovery Mode

  1. First of all, Power off your phone.
  2. Boot ZTE Warp Sync into Recovery Mode.
  3. From the Recovery Mode menu, choose "wipe data/factory reset" using Volume buttons and press the Power button to confirm.
  4. ZTE Warp Sync Factory Reset
  5. In the next step, choose "Yes -- delete all user data" to confirm the operation.
  6. ZTE Warp Sync Factory Reset
  7. Now, the data and settings should be wiped.
  8. Once done, the Recovery Mode menu should appear. Choose "reboot system now".
  9. ZTE Warp Sync Factory Reset
  10. That’s it! ZTE Warp Sync Hard Reset has been performed.

Note: After ZTE Warp Sync Hard Reset you may be required to enter the previously used Google Account details while setting up the device. This is a Security feature added by Google starting from Android 5.0 Lollipop and this feature is called Factory Reset Protection (FRP).

How to Soft Reset ZTE Warp Sync

  1. Firstly, press and hold the Power button.
  2. Choose Power Off from the menu that appears on the screen.
  3. Wait for a couple of seconds for the device to Power OFF.
  4. Now, hold down the Power key to turn the device back ON.
  5. Well done! ZTE Warp Sync Soft Reset is performed.

Reader Interactions

LEAVE A REPLY Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

SELECT A DEVICE MANUFACTURER

  • About
  • Privacy Policy
  • Contact Us
  • Advertise
  • Sitemap

Copyright © 2023. Droid Reset | This site is not affiliated with Google or any of the device manufacturers listed on this site.